Cordless Car Vacuum 17,000 Pa, HEPA, USB-C, LCD, Multi-Nozzle

Motor Specs, Cabin-Scale Form

This handheld unit uses a 20 W motor with a published maximum speed of 50,000 RPM and a rated suction value of 17,000 Pa. Airflow routes through a HEPA filter into a 0.1 gal (0.38 L) dust cup. The housing is built with two functional ends: a front intake for debris pickup and a rear outlet for blowing when a compatible nozzle is installed.

Front Intake, Rear Blow Outlet

Power comes from an internal 2,000 mAh rechargeable lithium-ion battery and runs in a single power mode controlled by touch input. Listed runtime is 15–30 minutes per charge, with an approximate 2-hour recharge time via USB-C. The LCD screen indicates operating and charging status. Attachments mount to either the intake side or the outlet side based on the nozzle interface.

USB-C Charging, Nozzle Fitment, Cup Service

Recharge using the included USB-C cable until the indicator shows a full charge state. Fit the crevice tool for tight areas such as seat tracks, console seams, and trim gaps; use brush heads for vents and textured surfaces. Empty the dust cup at the marked fill line, then rinse the cup and HEPA filter with water and allow the filter to dry completely before reassembly.

Product Benefits:

• Cabin Fit: Compact handheld size for storage in glove box, door pocket, or center console.
  
• Dual-End Nozzle Use: Attachments can mount on the front intake or rear outlet based on the nozzle interface.
  
• Touch Control: Single power mode operated by touch input.
  
• Charge Status Display: LCD shows operating and charging status.
  
• Cup and Filter Service: Dust cup empties at the marked fill line; cup and HEPA filter can be rinsed and the filter must dry fully before reassembly.

Specification:

• Material: Matte-finish plastic housing 
  
• Dimensions: 8.26 × 2.95 × 7.67 in 
  
• Weight: 1.32 lb 
  
• Power Source or Voltage: Rechargeable lithium-ion battery, 2,000 mAh; 20 W; listed 2.0 A
  
• Operating Range or Capacity: 17,000 Pa rated suction; up to 50,000 RPM; 15–30 min runtime; ~2 hr charge time; 75 dB listed noise level; dust cup 0.1 gal (0.38 L)
  
• Connection Type: USB-C charging cable; detachable nozzle interfaces for intake and outlet ends
  
• Placement or Use Area: Interior cabin, trunk, cargo area, and other vehicle access points